search
ToyCarDealer.com, your Siku dealer since 2004.
If you are a customer from outside the EU, you can buy from us without VAT!
The webshop will only calculate your discount after logging in.
Waveist model car axles 10-Set
HW042V2 10-set
€6.57
Unique set for 10 cars.
Can be used for replacing bent axles, or because you want to mount other wheels on your model.
Because they are glued to the inside of the axles (they are hollow), the wheels can turn smoothly.
Also useful if you have a car that is wider than 30mm. Because the axle ends are glued into the axles, you can even go up to a width of 50mm!
TIP: You can also secure it without glue if you bend the small pins just a little with small pliers and then insert it into the hollow tube. The friction will secure everything in place, and no glue is needed! This way you can easily release the wheels later.
If the axle pin is too difficult to insert, you have bent it too much and straighten the pin a little more.
If the axle pin comes out easily, you need to bend it a little more.
Complete set for 10 cars: 20 complete axles.
For models with a minimum axle width: 30 mm
NB!
These are very small parts, ABSOLUTELY NOT suitable for small children!
Fits models from Matchbox, Hot Wheels and many other 1/64 scale brands.
Beveiligingsbeleid (bewerken met de module Klantenverzekering)
Sustainable shipping We pack the items as well as possible. Sustainable and environmentally friendly packaging.
Fast delivery, worldwide! We send the orders daily, you always receive a shipping code and everything is insured.
We have not yet tested whether it fits on Siku wheels.
HW042V2 10-set
Data sheet
- Scale
- 1:64
Comments (0)
Unique set for 10 cars.
Can be used for replacing bent axles, or because you want to mount other wheels on your model.
Because they are glued to the inside of the axles (they are hollow), the wheels can turn smoothly.
Also useful if you have a car that is wider than 30mm. Because the axle ends are glued into the axles, you can even go up to a width of 50mm!
TIP: You can also secure it without glue if you bend the small pins just a little with small pliers and then insert it into the hollow tube. The friction will secure everything in place, and no glue is needed! This way you can easily release the wheels later.
If the axle pin is too difficult to insert, you have bent it too much and straighten the pin a little more.
If the axle pin comes out easily, you need to bend it a little more.
Complete set for 10 cars: 20 complete axles.
For models with a minimum axle width: 30 mm
NB!
These are very small parts, ABSOLUTELY NOT suitable for small children!
Fits models from Matchbox, Hot Wheels and many other 1/64 scale brands.